The following are modifications which have been implimented on the Bishop BEQ2432

1) 6 dB gain for the Tape and Aux Inputs
2) Tape/Line Input Flip switch
3) Extend Low-Mid Frequency Sweep Range to 75Hz
4) Remote Talk Back circuit (uses one of the headphone jacks as the remote connector)
5) Changed Low Frequency Shelf select frequencies to 60Hz and 100Hz
6) Added routing of the Aux Returns( as Stereo pairs) to corresponding Left Aux Send Level pot. The output of the pot feeds Aux 9/10 pair . This allows a path for Effects into the Cue.
7) Added a switch to add Aux Send 7/8 into Aux Send 9/10. This gives access to ALL Line and Tape inputs into Aux Send pair 9/10.
8) Replaced factory 8V Analog meter lamps. Installed; 15V lamps w/ 4x intensity, a heavier power supply , a rheostat to allow adjustment of lamp intensity .
9) Replaced T.B. XLR connector w/ custom Electret mic element