 |
 |
 |
|
Q:
digitech RP2000: How do I reinitialize the RP2000?
A:
The reinitialization procedure will return everything (including user presets) back to the original factory settings. Hold in the RHYTHM button while turning the power ON. Hold the button until the display shows all X's. Finally, press the FX Mode button. Your RP2000 will briefly read 'RESET' and will then prompt you to re-calibrate the expression pedal. When the display reads 'TOE UP' rock the pedal all the back and press the #3 footswitch. When the display reads 'TOE DN' rock the pedal all the way forward and press the #2 footswitch. Your RP2000 is now reinitialized.
Other Popular Articles:
• digitech RP2000: How do I scroll DOWN through the banks or programs? The bank button only goes up. • digitech RP2000: How can volume discrepencies between red and green channel be alleviated? • digitech RP14: My RP14 seems warm after it's been on for a while, is this normal? • digitech RP14: When I assign the expression pedal to a parameter, nothing happens, why? • digitech RP14: When I use the jam-along jack, I only hear signal out of one side, why? |
Copyright © 2026. All rights reserved.