Splitting the keyboard allows you to play 2 or more sounds simultaneously on separate sections of the keyboard. For the purposes of this example, we will use Performance "USER:16 Bass / Lead."

1. Press PERFORM.
2. Use the VALUE dial to select "USER:16 Bass / Lead."
3. Press LOCAL/TX/RX, then press F1.
4. CURSOR to KEY MODE and use the VALUE dial to select "LAYER."
5. CURSOR to LOCAL SW and press the TRACK/PART buttons 1 and 2 so they are lit.
6. Press PERFORM, then press F2 [K. Range]
7. Use the VALUE dial to select "C-1:C4" for the Part 1 Key Range and "C#4:G9" for the Part 2 Key Range.

Performance Key Range Box
There will now be a Bass Patch for the lower keyboard range and a solo Synth Patch for the upper keyboard range. Use the following procedure to select different sounds:

1. Press F3 [Part], then press the TRACK/PART 1 button.
2. Use the CURSOR buttons and the VALUE dial to select the desired Patch Group and Patch Number for the upper part of the keyboard.
3. Press the TRACK/PART 2 button and repeat step 2 to select the desired Patch for the lower part.