One of the most common procedures you will perform on your DJ-70/DJ-70MKII will be loading Patches from a floppy disk. A Patch is usually the 'finished' version of the sound you are trying to create. Use the following procedure to load a Patch:


1. Insert the floppy disk containing the Patches you wish to load into the disk drive (the Demo disk will work if you don't have another disk).
2. Press DISK. The DJ-70/DJ-70MKII will access the disk that is in the drive.
3. Use the CURSOR UP button to highlight the "Target" portion of the display. Use the VALUE DIAL to select "Patch." The DJ-70/DJ-70MKII will display all Patches found on that disk.
4. Use the CURSOR buttons to highlight the desired Patch and press S1 to initiate loading. "Now Working" will be displayed on the screen and you will hear the disk drive spinning. "Complete" will be displayed when the DJ-70/DJ-70MKII is finished loading the selected Patch.

NOTE: If you already have Patches loaded into the DJ-70/DJ-70MKII's internal memory, "Clear Internal Memory Before Loading?" will be displayed. If you would like to load Patches without erasing the current Patches, use the LEFT/RIGHT CURSOR buttons to highlight "No" and press S1. If you would like to erase the current Patches (from the DJ-70/DJ-70MKII's internal memory) before loading any new Patches, use the LEFT/RIGHT CURSOR buttons to highlight "Yes" and press S1.

5. Repeat steps 3 and 4 to load additional Patches into the DJ-70/DJ-70MKII.
TIP: The DJ-70 and DJ-70MKII are compatible with the Roland S-700 series Sample library