1. Go through steps 1-3 (in the section on starting from MIDI Setups) in tutorial #1.

2. Hold the Controllers button and move Slider A. The display now shows Zone:1 Slider A, Ctrl Num:None. Press 7, then Enter to assign Slider A to Volume. (Controller #7 is MIDI Volume. For a complete list of all the MIDI controllers, see Appendix F in the manual.)

3. Go through steps 4 and 5 in tutorial #1 to create a second zone. Remember that to make zone 2 active so you hear it, you may need to press the zone 2 button twice.

4. Hold the Controllers button and move Slider B. The display now shows Zone:2 Slider B, Ctrl Num:None. Press 7, then Enter to assign Slider B to Volume. Play the keyboard and move the two sliders. You can control the volume of each zone independently.

5. Go through steps 7 and 8 in tutorial #1 to name and save your Setup.

Of course, you can use the C and D sliders to control volumes on the 3rd and 4th zone in a Setup. Or, you could also assign the same slider to volume in more than one zone. We will show an example of this in tutorial #6.