In this section, we look at how you change the
default settings to use effect 2 as a stereo input pro-cessor
using assignable send/return inserts 1 and 2.
The insert will be assigned with channels 1 and 2.
Again, use the I/O key (the SHIFT indicator must be
lit) to access the 17 through 32 screen (soft key 2),
allowing the de-assignment of the assignable returns
1 and 2 from channels 29 and 30.
Again, pick a “safe” or harmless option of an input
that you are not using.
Next, the assignable sends and returns have to be
changed from their send/return loop setting to an
insert setting.
Press soft key 4 to access the assignable output
screen:
Assignable send/returns 1 and 2 should be set to the
insert mode.
The insert channels (that is, the channels on which
the inserts will work) should be set to channels 1 and
2 (of course, you are free to change this if you want
to use other channels with this effect.
In the EFFECT patch page, select Stereo as the input
type for effect 2.
Change the input source to ASGN INS 1 SEND (CH 1)
for the left input and ASGN INS 2 SEND (CH 2) for the
right input.
NOTE
It is important that these operations are carried out in
the order here.