Use the following procedure to create a Patch with one or more Tones assigned to the keyboard:

1. Load the desired Tone or Tones into the S-50's memory (as described previously).
2. Use the PATCH SELECTOR buttons to select an empty Patch location.
3. Press EDIT MODE followed by P2 to select "Split." The Split Info page will be displayed.
4. CURSOR to 1st Tone and use the ALPHA DIAL to select the Tone you wish to assign to the keyboard.
5. Press +PAGE to display the Split Set page.
6. Press the desired key(s) you wish to use to trigger the selected Tone. A marker will be displayed on the line just above the keyboard graphic on your screen. This indicates the key (or keys) where the Tone has been assigned.
7. Press -PAGE to return to the Split Info page. Play the keyboard to audition your settings.
8. Repeat steps 4-6 above to assign additional Tones to the keyboard as desired for your Patch.
9. Press P1 to display the Patch PRM page. Use the CURSOR buttons and ALPHA DIAL to set values for parameters 5-10 as desired before naming and saving your Patch.

NOTE: When creating a Patch using the V-SW, X-Fade or V-Mix modes, use the CURSOR buttons and ALPHA DIAL to select values for parameters 1-10 on the Patch PRM page and select two Tones in step #4 above - one to be assigned to 1st Tone, and one to 2nd Tone.