How do I sync Cakewalk Sonar and Aardvark Aark24 to an Alesis BRC and Adats...

How do I sync Cakewalk Sonar and Aardvark Aark24 to an Alesis BRC and Adats?

1. Options Audio
a. General tab
b. Playback Timing Master 1,2 Aark 24
c. Recording Timing Master 1,2 Aark 24
d. Sampling Rate (whatever ADAT is at 44.1 or 48), Bit 24
e. Latency < 50 msec
f. Advanced Tab
g. Synchronization, Trigger and Free Wheel

2. Options Project
a. Clock tab
b. Click SMPTE/MTC
c. Midi Output tab
d. check Transmit MMC
e. uncheck Zero controllers when play stops

3. Options Global
a. Timecode Tab
b. Always switch clock source and start (option 2 in list)
c. Maintain current clock source and wait for timecode (option 2 in the list)

AARDVARK

Sync selection must be set to ADAT

NOTE: This means that the ADAT is the MASTER clock for audio recording and playback.

Other Popular Articles:
• Optimizing your Apple computer for a ProTools LE in Mac OS9.
• If resolving the Sync I/O to an external Word Clock (1x) source and configure the Sync I/O to a Base Clock of 256x (Super Clock), what clock signal is being outputted to my audio interfaces?
• Word Clock input on the Sync I/O is ONLY 1x rate. SuperClock (256x) is ONLY available on the Sync I/O's Word Clock output. What connections do I make if attempting to use an AardSync to resolve the Sync I/O at 48k?
• Power light around power switch does not turn green after downloading SYNC I/O firmware from Pro Tools.
• SYNC I/O won't boot after a firmware upgrade has been performed and the unit has been power cycled.