In Combination mode, you can layer, split or velocity-switch up to eight Programs. There are 512
Combinations in TRITON's internal memory (4 Banks of 128 each). As in Program mode, Combinations can
be Selected-By-Bank and Selected-By-Category. Two arpeggio patterns can be triggered simultaneously in a Combination, and AMS / controller functions are also available in this mode. Each Combination can have up to 5 Insert effects and 2 Master effects, plus stereo 3-band EQ. Combinations can be copied to TRITON's sequencer with, or without their effects, and used to create new songs. If the EXB-MOSS option board is installed, up to 6 MOSS DSP timbres can be assigned to a Combination.
To select a Combination follow this procedure:
1. Press the COMBI key to the left of the display to enter Combination mode. COMBINATION P0 Play will
be indicated in the upper-left of the display.
2. Press a BANK key (if not already selected) - it will light, and the display will indicate the current bank.
There are a number of ways to select Combinations. You can use the Bank, Numeric and ENTER keys to
direct-select a Combination, or use the DIAL or value keys to make a selection from within a Bank.

Tip: Combinations can be selected using the Select by Bank and Select by Category functions just like in Program mode.

Tip: If you want a Combination to automatically - trigger arpeggio patterns in performance, first select the Combination, then turn ON the Arpeggiator, then press the REC/WRITE key -
a popup menu prompts you with "Update Combination". Press "OK" to re-write the Combination with the Arpeggiator set to ON. You'll also need to make sure that the Auto Arpeggiator function is checked in GLOBAL (P0).