DiskTooSlowErr - The CPU's file system was unable to perform certain disk operations quickly enough.- Verify the drive (with correct firmware) is on the compatibility list.- Verify all software is current (PT, DAE, SysAxe, A/ROSE, etc).- Calculate Folder Sizes (in Views Control Panel) should be disabled.- Verify the SCSI Bus (including internal) is terminated properly.- Check for fragmentation, and the last time the drive was initialized.- Check SCSI length. (The SCSI chain should be less than 15').- Reinitialize the drive with a known compatible formatting program.- Confirm that the slave clock configurations are correct. (Slave out of interface A, routes to Slave in of interface B etc.)- High DAE Playback Buffer. Set the DAE Buffer to minimum when using a Disk I/O or Project card.)- Bounce tracks with a lot of edits, then replace the original regions with the bounced file.- System Disk Cache may be set too high. Set to 128-512k.- Make sure that you are not attempting to play back a audio from a CD.- Confirm "Enable Fast SCSI" is not selected in Mt Digi Control Panel