ADAT bridge, Digi 001 and Pro Tools getting clicks and pops when connected...

ADAT bridge, Digi 001 and Pro Tools getting clicks and pops when connected to a Yamaha O1-V. The problem occurs during an ADAT lite pipe transfer, on playback or stopped.

This occurs when the O1-V is in internal clock mode. Change this on the O1-V from the setup menu and select the ADAT lite pipe as the clock source.

Other Popular Articles:
• Adaptec 2940 or 2930 in a G4/Sawtooth running Mac OS 9.0 Causes Pro Tools 5.0 (TDM and LE) sessions with plug-ins to freeze the system (Lock up).
• Pro Tools locks up when recording a midi track that is going to Studio9000.
• "Pro Tools sessions can only be created on a valid audio drive attached to the Disk I/O card" on a PT|24 or 24 MIX system.
• Audio processing is conflicting with other CPU tasks.
• Recording stops shortly after it is started, usually within a few seconds and no error message is posted even when recording a single track on Win 98.