Pro Audio Support

Q:
-6086 interrupts recording of a single mono audio track when HW buffer set to 64 samples on my TiBook 800 with a Digi 002.
 
A:
This is caused by significant Firewire interrupt latency (up to 2ms) on the TiBook 800. The workaround is to use the 128 buffer setting.



Other Popular Articles:
• Pro Tools LE 5.3.2 crashes with error type 3 and an error when launching with Pro Tools|HD cards and a Digi 002 connected. The error reads " no peripheral was detected connected to the first HD card"
• With record enabled tracks on a Digi 002 in a Pro Tools LE 5.3.2 session, an audible "Pop" occurs when closing Playback Engine dialog by clicking "OK" (after changing settings in the dialog).
• Apple Powerbook 800 only - Pops and clicks on analog input channels during idle record-monitor at lower hardware buffer sizes.
• Preferences window shows Machine Control options in Pro Tools LE 5.3.2.
• On the Digi 002 with Pro Tools LE 5.3.2, adjusting analog input gain (between 9 and 10 o'clock) yields 40dB noise bumps while gain pot is being turned. Meters settle back down to -inf when knob-turning stops.