Procedure for fading-in
Here’s how to fade-in the IN–OUT region of track 1.
1 Register the IN and OUT times.
Register the start and end times of the desired fadein.
(∞p.97)
2 Select the fade-in command.
In the [TRACK] “EditTrk” tab page, set “EditType”
to “FadeTrack.”
3 Select the fade-in curve.
Press the “Mode” button to access the dialog box.
For this example, select the “A” curve, press the
“OK” button to return to the [TRACK] “EditTrk”
tab page.
4 Select the fade-in destination track number.
Set “DestTrack” to track 1.
5 Execute the editing command.
Press the “Exec.” button. The display will ask
“AreYouSure?,” so press the “Yes” button to execute
the command.
When processing is completed, the display will
indicate “Completed.” Press the “OK” button.
6 Verify that the data was faded correctly.
Press the [IN/LOC1] key to play back from the IN
location, and verify that the data was faded-in correctly.
You can use Undo to return to the state before executing
the command. (∞p.99)
The longer the specified range (IN–OUT), the
longer this command will take to process until the
“Completed” display appears.
DestTrack