|
|
|
|
|
|
Q:
828mkII Feature Summary
A: * CueMix DSP™ near-zero monitoring system. * Front-panel control - access your entire mix, or any 828mkII setting, directly from the front panel. * Stand-alone operation - program your mixes at the studio and then bring the 828mkII to your gig - no computer needed. Need to tweak the mix? Do it on site using the back-lit LCD and front-panel controls. * Multiple CueMix DSP mixes - create different monitor mixes for the main outs and headphones. Add send/return loops for outboard gear - with no latency. * Two mic pre-amps with switchable 48-volt phantom power, front-panel trim controls and pre-amplified sends. * Mic/guitar instrument sends - add your favorite outboard EQ, preamp, reverb or other processor to the two mic/guitar inputs, before the signal goes digital. * 20 inputs / 22 outputs - there's no channel sharing in the 828mkII; the mic inputs, S/PDIF I/O, headphone out and main outs are all handled as separate channels. * 8 channels of 24-bit ADAT optical input/output. Eight channels at 44.1/48kHz. Four channels at 88.2/96kHz. * Sample-accurate digital transfers between ADAT digital tape decks and the computer via the ADAT sync port. * Sample-accurate MIDI - connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software. * Expandable - add additional 828, 828mkII or 896 FireWire interfaces for additional I/O. * Eight 24-bit 96kHz analog inputs and outputs on balanced/unbalanced 1/4" TRS jacks * Separate TRS main outs and front-panel headphone jack, each with independent volume control. * Stereo 24-bit 96kHz S/PDIF in/out * Word clock in and out * SMPTE in and out * Includes drivers for Mac & PC, including ASIO, WDM, Wave, GSIF, Core Audio, and Core MIDI. Supports all popular Macintosh and Windows audio software. * 100% compatible with all host-based effects processing in today's popular audio programs. * Includes AudioDesk full-featured sample-accurate workstation software for the Macintosh with recording, editing, mixing, real-time 32-bit effects processing & sample-accurate sync. * Two FireWire ports for daisy-chaining without a hub * Front panel volume control for main outputs. * Front panel headphone jack with independent volume control. * Front panel meters for all analog and digital I/O, plus SMPTE sync tach and lock LEDs. * Dedicated front panel clock status LEDs.
Other Popular Articles:
What templates are provided with the ReMOTE 25? Are there any more Remote 25 templates to download? Can the ReMOTE 25 be used with a Mac? Are there any known issues where iLok.com returns a "No Instance available" or "The requested application was not found on this server" error? Following the Reaktor 4 tutorial, I try to insert a 4-pole filter into a structure. This repeatable crashes the application. |