How do I set the H4 to work as an audio interface?

1. Connect the [USB] port of the H4 to the computer using a USB cable.

2. Verify that the recorder is stopped. Then press the center of the [MENU] key at the stereo mode or 4-track mode top screen.

3. Move the jog dial up/down to bring the cursor to "USB", and then press the jog dial.

4. Move the jog dial up/down to bring the cursor to "Audio I/O", and then press the jog dial.

5. The sampling rate can be change from this screen.

6. To have the H4 recognized as an audio interface by the computer, move the jog dial up/down to select the "CONNECT" item, then press the jog dial.

H4 Manual p.80.

Other Popular Articles:
• With respect to stringed instruments, what exactly IS intonation?
• What is the function of the Mix knob on my Fast Track USB/Podcast Factory USB/ Fast Track Pro?
• My USB audio device supports 24-bit / 96kHz audio quality, but I can’t playback or record at 96kHz in my audio software. Why isn’t 96kHz a selectable option for me?
• What is the difference between the input mix and the S/W tracks (represented by either side of the output crossfaders in SaffireControl PRO)?
• How do you select which audio tracks return to each Saffire PRO bus (meaning the S/W tracks within SaffireControl PRO) from your software (e.g. Ableton Live)?