#1 Plug the Digital out of the K2500 into the digital in on your 882 - you will need a special cable XLR(F) to RCA (M). Pin 2 hot and pin 1/3 shorted to ground.
#2 On the sample input page in your K2500 set the input to ANALOG and match the sample rate to the rate you set in Protools.
#3 In Protools under SETTING - go to HARDWARE and set channel 1,2 input to Digital and set Sync Mode to Digital.
#4 Record your tracks#1 Plug the Digital out of the K2500 into the digital in on your 882 - you will need a special cable XLR(F) to RCA (M). Pin 2 hot and pin 1/3 shorted to ground.
#2 On the sample input page in your K2500 set the input to ANALOG and match the sample rate to the rate you set in Protools.
#3 In Protools under SETTING - go to HARDWARE and set channel 1,2 input to Digital and set Sync Mode to Digital.
#4 Record your tracks