1. Go to Setup mode, and select 97 ControlSetup.
2. Press Edit to enter the Setup Editor.
3. Press the more> soft button, then press the FOOTSW soft button.
4. Use the cursor buttons to highlight TapTempo (it's the value of the Dest parameter for FtSw4).
5. On the alphanumeric button pad, press 6, 8, Enter. This changes the value to LegatoSw, which is MIDI 68 (for VAST programs, MIDI 68 will now control Legato Switch, but for
KB3 programs, it will switch between slow and fast rotary speaker effect).
6. Press the more> soft button, then press the RIBBON soft button.
7. Highlight AuxBend2 (it's the value of the Dest parameter for SmRib).
8. On the alphanumeric button pad, press 1 6 Enter. This changes the value to Ctl A, which is MIDI 16.
9. Highlight MPress (it;s the value of the Dest parameter for SmPrs).
10. On the alphanumeric button pad, press 1, 7, Enter. This changes the value to Ctl B, which is MIDI 17.
11. Highlight AuxBend1 (it's the value of the Dest parameter for LgRibÑor Sect1 if the large ribbon is confgured in three sections).
12. On the alphanumeric button pad, press 1, 8, Enter. This changes the value to Ctl C, which is MIDI 18.
13. Press the SWITCH soft button.
14. Highlight ArpSw (it's the value of the Dest parameter for PSw1ÑButton 9 above the Pitch Wheel).
15. On the alphanumeric button pad, press 6, 9, Enter. This changes the value to FrezPd, which is MIDI 69.
16. Highlight MIDI29 (it's the value of the Dest parameter for PSw2ÑButton 10 above the Mod Wheel).
17. On the alphanumeric button pad, press 7, 0, Enter. This changes the value to MIDI70.
18. Press Exit. The K2600 will ask you if you want to save the setup. Press the Rename soft button.
19. Press either Chan/Bank buttons until the KbdNaming parameter in the top line of the display show a value of Adv. This lets you rename the setup by playing notes (in this
example, we're going to rename it as KB3 Setup). Of course, if you prefer, you can use soft buttons and data entry (Alpha Wheel, cursor buttons, or alphanumeric button pad) to rename the setup.
20. Hold down G 6, then strike D 4 (or do the equivalent on your MIDI source). This enters a
K as the first character in the name.
21. Hold down G 6 and strike B 2 to enter a B.
22. Release G 6, then press A # 2 to enter a 3.
23. Strike G # 6 three times to delete three characters. Notice how the remaining characters
shift to the left.
24. Strike G 2 to enter a space. You're finished renaming.
25. Press OK. The save dialog reappears. Change the setup's ID if you want, then press Save. You'll return to Setup mode.