|
|
|
|
|
|
Q:
Specifications for 882 Studio Audio Interface.
A:
The 882 Studio (PH002, 8x8) is an audio interface used with Session 8 (Mac or PC), Pro Tools Project, or Pro Tools III. It connects to a Session 8 SCSI Mac (PT Project Card), Session 8 SCSI PC, or Disk I/O card (Bridge I/O not supported).Sample Rates: 44.1k & 48k.A/D: 1-bit DeltaSigma 64x oversampling.D/A: 1-bit switched capacitor 256x oversampling.Frequency Response: 20-20k +/-0.3dB.External Sync: 256x sample rate (Super Clock) in/out, about 3 Vpp, BNC connectors.S/N: >93dB A/D, >98dB D/A at 22Hz to 22kHz, A weighted.THD: <.005% 1kHz, .5dB below max output, A weighted.Mic Inputs: Bal. low-impedance XLR, input range -50dB to -6dB. Mic imp = 7.5kohms.Instrument Inputs: Unbalanced 1/4", nominal level 0dB max =+12dB, imp = 10kohms.Line Inputs: (fx returns) Unbalanced 1/4" nominal level -10dB, max = 0dB.Submix Inputs: Unbalanced 1/4" nominal level -10dB, max = 0dB.Digital I/O: S/PDIF.Audio inputs and outputs: 4 Mic/instrument inputs with trim controls, 10 x 2 analog submixer for outboard gear, 8 line inputs (configurable as Effect Returns), 4 insert connections, 8 line outputs (configurable as 4 sends, mix and cue out), 2 head phone jacks plus cassette input/output.Dimensions: 3 rack space, 9.5lbsPower: 90-240 VAC Automatic voltage switching, 17watts.
Other Popular Articles:
Specifications for 888 Audio Interface. 9x error in MasterList CD. A hard disk partition does not show up as a record source in Pro Tools Disk Allocation window, even though the partition mounts (it's seen in the Finder). A Pro Tools session created via OMF has audio that is out of sync(late) when played back against the video. "A serious clock error has occurred" or "TDM Connection could not be made -7101" or the Macintosh just freezes when assigning a new Plug-In. |