G4 766 and above Quicksilver machines also G4's using Mac OS 9.2. When...

G4 766 and above Quicksilver machines also G4's using Mac OS 9.2. When used with the ATTO EPCI-DC SCSI64, most newer 10-15000 RPM drives ( including Digidrives and Seagates) will not mount on the desktop.

Mounting problems are an issue between the ATTO driver and OS 9.2. Please try ATTO ExpressPro-Tools version 2.7 (available at www.attotech.com website).

Other Popular Articles:
• The Pro Tools GUI and all meters on my Control 24 are very jerky.
• Autotune version 2.x causes Pro Tools to crash if Control 24 is present.
• Pro Tools only recognizes one Ethernet port in the system.Appletalk recognizes both ports:1) Ethernet Built-in2) Ethernet Slot 4However, the Setups>Peripherals>Ethernet Controllers window only detect one port. The Ethernet ports available in Pro Tools appear as follows:enet1enet1
• There is a loud noise coming from the fan in my Power Mac G4 whenever the 001 interface is connected.
• MP3 Option is creating a longer mp3 file than it should be. If my file is 10 seconds, the btd mp3 is 12.3 seconds and the extra 2.3 sec are from the last section of the bounce to disk (i.e 7.7sec to 10sec.).