Pro Audio Support

Q:
Soft SampleCell v.3.1. has lost input when using in Stand Alone mode on a Digi 002.
 
A:
MIDI input to Soft SampleCell v.3.1 Editor, via Digi 002 or 3rd party MIDI interface, is lost upon switch of Soft SampleCell I/O to Sound Manager (Built-In).This is a known limitation. If you need to use SSC in Stand Alone mode, you will have to use it via Direct I/O (rather than Sound Manager)To restore MIDI to Soft SampleCell:1) Open Soft SampleCell Setup.2) Switch Output to Sound Manager.3) Quit and relaunch Soft SampleCell.4) Open Soft SampleCell Setup and set the Output back to Direct I/O.



Other Popular Articles:
• Noise pops are emitted from the Digi 002 Monitor Outputs while making a FireWire connection with computer.
• When I tried to Import Tracks from a Pro Tools v.4.3.1 Windows session into my Pro Tools LE v.5.3.2/Digi 002 session, my plug-ins were made inactive and there is no audio on my tracks.
• Digi 002 faders reset (a.k.a. slam) down to -inf when a change is made to OMS Setup while Pro Tools LE is running. This occurs even if Digi 002's Fader Mute is engaged prior to launching OMS Setup.
• Minimizing a Pro Tools LE v.5.3.2 session with a QuickTime movie results in a broken Edit Window and gives a -9092 error.
• I got a pop and a loud blast of white noise when I powered off and on the Digital device connected to the S/PDIF inputs on the Digi 002.