Technical Specifications for the 96 I/O

- Max. power draw from the 96 I/O is 1.5A Output Impedance: 50 ohms (typical)Input Impedance 3.2 kohms (typical)A/D Sample Rate: 44.1, 48, 88.2, 96 kHz 10% Dynamic Range: 115 dB (A-weighted), 112 dB (unweighted); see Notes 1 and 4 THD+N: 0.0007% (103 dB); +17 dBu @ 997 Hz; see Note 1 Frequency Response: 0.05 dB @ 2 dBu, 20 Hz 20 kHz; see Notes 1 and 2 D/A Sample Rate: 44.1, 48, 88.2, 96 kHz 10% Dynamic Range: 114 dB (A-weighted), 112 dB (unweighted); see Notes 1 and 3 THD+N: 0.0013% (97 dB); 1 dBFS @ 997 Hz; see Note 1 Frequency Response: +0.1/0.2 dB; 20 dBFS, 20 Hz 20 kHz; see Notes 1 and 2 Sample Rate = 48 kHz, Noise BW = 22 Hz 20 kHz unless otherwise noted, Tambient = +25 C Weight in box: 22.75 lbs Weight without packing: 17.0 lbs Dimensions: 19" W x 15" D x 3.5" H Dimensions in box: 24" W x 21" D x 9" HNote 1: Measurement made using +4 dBu inputs or outputsNote 2: Measured relative to level at 1 kHzNote 3: Measured with digital input at 60 dBFS @ 997 HzNote 4: ADC measured with analog input level at 42 dBu @ 997 Hz

Other Popular Articles:
• Steps to create a multi-partition system with both OS X and OS 9.22
• How to tell the difference between straight through and crossover Ethernet cables?
• In reference to the Dithered Mixer: If I want to submix elements to stereo pair outputs, it is far better to submix each pair through a master fader, rather then simply assigning all those submixed elements to the same outputs, or going through an Aux first.
• When Pro Tools boots, the edit window is completely blank, and when I move the mouse over the area where track one would be, the mouse leaves red vertical lines on the screen. Digi sent a second HD Core card and it's acting the exact same way.
• Pro Tools windows are blank. No graphics are visible.