Procedure for exchanging with a V-track
Here’s how currently selected V-track “a” of track 1 can
be exchanged with V-track “b” of track 1.
1 Verify the copy destination.
In the [TRACK] “Vtr1–8” tab page, make sure that
track 1 V-track “b” is the track that you wish to
exchange. After you verify this, you must return
the setting to “a.” (∞p.81)
2 Select the Swap Whole command.
In the [TRACK] “EditTrk” tab page, set “EditType”
to “SwapWholeTrack.”
3 Select the swap source track number.
Set “SourceTrack” to track 1.
4 Select the swap destination track number.
Set “DestTrack” to track 1.
5 Select the swap destination V-track.
Set “DestVTrack” to V-track “b.”
6 Execute the editing command.
Press the “Exec.” button. The display will ask
“AreYouSure?,” so press the “Yes” button to execute
the command.
When processing is completed, the display will
indicate “Completed.” Press the “OK” button.
7 In the [TRACK] “Vtr1–8” tab page, select V-track
“b” for track 1.
8 Verify that the data was exchanged correctly.
Play back from the beginning of the song, and verify
that the data was exchanged correctly.
You can use Undo to return to the state before executing
the command. (∞p.99)
In this case, you must return track 1 to V-track “a.”