Pro Audio Support

Q:
How do I synchronize the Roland XP80 as a Master and as a Slave?
 
A:
When synchronizing the XP80 to any other device, you will need to use MIDI Clock. ( not MTC or MMC )

Use the following procedure to set the XP-60/80 as Master.

1. Press Sequencer.

2. Press F1 [Setup].

3. Press F6 [SEQ Sys].

4. Set Sync Mode to INTERNAL.

5. Set Sync Output to ON.


Use the following procedure to set the XP-60/80 as a Slave.

1. Press Sequencer.

2. Press F1 [Setup].

3. Press F6 [SEQ Sys].

4. Set Sync Mode to SLAVE.

NOTE: The XP-60/80 will only slave to MIDI Clock.




Other Popular Articles:
• How do I use All 16 Parts on the Roland XP80 with an External Sequencer?
• What Adat optical format does the MOTU 2408mk3 use for 88.1 or 96kHz?
• Can I change the latency on the RME Hammerfall HDSP96/52 card in Windows 98se and Windows ME?
• Can I change the latency on the RME Hammerfall HDSP96/52 card in Windows 2000 and Windows XP?
• Does the RME Hammerfall HDSP96/32 support ADAT optical at 192kHz?