MicroTrack 24/96: Fully charge the battery before first use!

Before you use your new MicroTrack 24/96 for the first time, the internal rechargeable battery needs to be completely charged.

The MicroTrack 24/96 battery ships with only a minimal charge. If you fail to charge the battery fully before first use, you may limit the maximum record time of the MicroTrack 24/96. To charge the battery, follow the steps below:

- Make sure the MicroTrack 24/96 is turned off.
- Plug the smaller end of the supplied USB cable into the USB connector on the bottom of the MicroTrack 24/96.
- Plug the large end of the USB cable into the supplied USB power supply.
- Plug the USB power supply into a power outlet.
- The battery indicator in the right upper corner of the LCD will be animated (repeatedly fills up from left to right) to indicate that the battery is currently being charged.
- When the battery is fully charged, the battery indicator will be displayed solid (no more movement).
- You can now disconnect the MicroTrack 24/96 from the USB cable.

Other Popular Articles:
• GS MagicStor 2.2 GB MicroDrive CF incompatible with MicroTrack 24/96
• I have a self-powered Audio Technica AT822 microphone. If I use a XLR to 1/4" adapter with my AT822 to connect to my MicroTrack 24/96, I get hissing noise instead of audio from the Mic. What can I do?
• The power supply that comes with the MicroTrack 24/96 accepts a standard USB cable. Can I use this to power up other USB devices than the MicroTrack 24/96 and use them standalone?
• The MicroTrack 24/96 shuts itself off when I insert- or eject a CompactFlash card or Microdrive while the device is on. Is this normal?
• I just got my new MicroTrack 24/96, charged it completely and then wanted to make the first recording, but it records only silence. What could be the problem?