Note: To connect the VM-7200/7100 and the
AE-7000 via R-BUS, a VM-24E I/O Expansion Board
(sold separately) must be installed in the VM
processor.
1. With the power off to all devices, connect the
VM-7200/7100 to the AE-7000 with the R-BUS
cable provided with AE-7000.
2. Turn the power on the AE-7000 first, then the
VM-7200/7100 processor. Wait for the
VM-7200/7100 control status to change to green,
then turn on the VM-C7200/C7100 console.
3. Press CLOCK SOURCE on the AE-7000 to
R-BUS to set the sampling clock.
Set up the VM-7000 as follows:
4. Hold down SHIFT and press PROJECT on the
VM-C7200/C7100 console.
5. Press the DOWN cursor to select the second
row of the SYSTEM MENU.
6. Press F1 [DIGITAL I/O].
7. Press the DOWN cursor to select WORD
CLOCK SOURCE.
8. Use the V1 knob to select INTERNAL.
9. Press F1 [SET] to confirm the setting.