A Performance can be created as a Split, for playing two Voices in separate Note Ranges. This method allows the user to set up different Splits for each Performance.


NOTE: If there is a PLG100XG Plug-in Board installed in the unit, the XG Voices in Parts 17-32 will normally be doubling the Voices in Parts 1-16. To avoid this, Parts 17-32 must be muted via MIDI, or manually on the instrument. (Only Parts 17 - 18 need to be muted for this example.) Click here for 'Muting and Resetting a PLG100XG Plug-in Board in a CS6X'.

Initializing a Performance:

TIP: When creating a new Performance setup, it is helpful to first clear the settings by initializing the Performance. Click here for 'Initializing a Performance on a CS6X'

Setting up a Split:


1) Press the [PERFORM] button to enter Performance Mode.

2) Press the [EDIT] button. The LED next to it will illuminate.

3) Turn the (PAGE) knob to select the 'MIX Vce' page.

4) Turn the (A) knob to select 'Part01'.

5) Use the (B) and (C) knobs to select the left-hand Voice.

6) Turn the (PAGE) knob to select the 'LYR Limit' page.

7) Use the (B) and (C) knobs to set the lower and upper 'Note Limit' for the lower section of the Split.

8) Turn the (PAGE) knob to select the 'MIX Vce' page.

9) Turn the (A) knob to select 'Part 02'.

10) Use the (B) and (C) knobs to select the right-hand Voice.

11) Turn the (PAGE) knob to select the 'LYR Limit' page.

12) Use the (B) and (C) knobs to set the lower and upper 'Note Limit' for the upper section of the Split.

13) Turn the (PAGE) knob to select the 'LYR Mode' page.

14) Turn the (1) knob in the 'ASSIGNABLE KNOB' group to turn the 'Layer' switch to 'ON'.
Reference: Owner's Manual, p. 119-123

Storing a Performance to Memory:

NOTE: To save this Performance setup for future use, it should be stored to the Internal memory or a SmartMedia Card (External memory).


1) Press the [STORE] button.

2) Turn the (1) knob to select Internal or External memory.

3) Turn the (2) knob to select the destination Performance number.

4) Press the [ENTER] button.

WARNING: The next step will overwrite the Performance currently in the destination number.

5) Press the [INC/DEC] button to store the Performance.
Reference: Owner's Manual, p. 141