How can I test the MIDI ports on my 002?

1) Connect a MIDI cable from output1 to input1 on the 002 rear panel2) Press the Standalone Button and select "yes" to enter standalone mode3) Press the F1/Utility button4) Press the SEL button beneath "Test" on the 3rd scribble strip5) Press the SEL button beneath the right-pointing arrow on the 8th scribble strip6) Press the SEL button beneath "MIDI" on the 2nd scribble7) Press the SEL button beneath "Out 1" on the 1st scribble. If the MIDI cable is good and the first scribble will read "Pass".8) Connect the MIDI cable to output 2 to repeat the test for the second MIDI output.

Other Popular Articles:
• When launching Pro Tools LE 5.3.1 (WinXP), the splash screen reads "Initializing MIDI" and then freezes. Upon restart Windows posts a "system has recovered from a severe error."
• Sometimes a "dot" (or period) appears in the timecode display of USD or SYNC I/O, why does this happen?
• The Stereo Aux. Input track is not getting any signal when using SampleTank and Mbox.
• After a few minutes of playback, distortion begins to creep into the session while using Pro Tools|HD
• Plug-in light on Control|24 will not close a plug-in window.