1 Insert a disk into the backup destination drive.
2 Select the backup source drive.
Use the [SONG] “SelSong” tab page to select the
backup source drive.
If you are using “Backup1Song,” select a song in
that drive. Select the song as described in “3. Selecting
another song” (•p.22), and then use the [SYSTEM]
“B–U/Rst” tab page “Source” to verify the
backup source song number.
3 Use “B–U/RstType” to select the backup type.
4 Select the backup destination drive (“Destination”).
Press the “Drive” button to access the dialog box.
Select the drive, press the “OK” button.
5 Prepare the disk(s).
The “Backup1Song” and “BackupAllSongs” commands
will indicate the number of disks required
for the backup. Make sure that you have the
required number of disks.
When using multiple disks, we recommend
that you number each disk beforehand.
6 Execute the backup.
Press the “Exec.” button. The display will ask
“AreYouSure?”, so press the “Yes” button to execute
the operation.
7 Exchange disks as necessary.
If multiple disks are necessary in step 5, a dialog
box will ask you for the next disk when each disk
fills up. Insert the next disk, press the “OK” button.
8 When the operation is finished, the display will
indicate “Completed.” Press the “OK” button.
Destination Source