The transport bar of the Reason sequencer will respond to incoming MIDI messages but the controls do not have fixed MIDI messages which they respond to. Instead they must be 'Auto Learnt'. The transport buttons in the ReMOTE Reason instrument templates have been pre-programmed to send the following MIDI CC messages:

Rewind - 112
Forward - 113
Stop - 114
Play - 115
Record- 103

All are set to control range 127-0, button type 'Momentary' and MIDI channel 1.

To assign the transport buttons on the ReMOTE to the transport functions in Reason take the following steps:

1. Open Reason with the ReMOTE connected and switched on and go to the preferences window.
2. Go to the 'Advanced MIDI' tab.
3. Ensure the ReMOTE is selected as the Remote Control input and exit preferences.
4. To assign, right-click (control-click on Mac) on the stop button in the transport bar and select 'Edit Remote Override Mapping...' to bring up the MIDI Remote window. Alternatively select 'Edit MIDI Remote Mapping' from the Options menu, so that green arrows appear by all of the assignable controls, and click on the stop button.
5. The MIDI Remote window will appear - ensure the 'Learn From Control Surface Input' box is checked.
6. Press the stop button on the ReMOTE (make sure that one of the Reason instrument templates is selected first) - the 'MIDI received' bar should flash and the correct assignment should be seen in the parameter boxes in the MIDI Remote window.
7. Click 'OK' to close the window and then repeat the assignment process for play, record, forward and rewind.
8. Once complete make sure you turn 'Edit MIDI Remote Mapping' off in the options menu but that 'Enable MIDI Remote Mapping' remains checked.