Why does the Analog LED on inputs 1/2 flash on an 888|24?

This indicates that the unit is in stand-alone mode. The 888|24 defaults to this mode when powered up. It is brought out of this mode when it is initialized, either by the DigiSystem INIT while booting the Mac (if a valid DigiSetup file exists), or by opening and closing the Hardware or Playback Engine dialogs in Pro Tools.

Other Popular Articles:
• The beginnings of regions (up to about 1800 samples) are clipped off during playback in Pro Tools on a Bit 3 chassis.
• Computer crashes with a Bus Error (Type 1) when DigiSystem INIT 3.2.2 is loading in a system with a Bit 3 13-slot Expansion Chassis.
• Specifications for 882 I/O Audio Interface.
• Audio files that were backed up to CD and then restored to an audio drive have clicks in them, but on other drives the files are fine.
• Suggested list of control panels and extensions to be used with ProTools 4.1.1 and earlier (avoiding extension conflicts).