If you have an external reverb or multieffects processor, you
can plug it into the DP-01 to use in your mix.
1. Plug the SEND on the rear panel of the DP-01
into the input of your effects processor.
2. Plug the outputs of your effects processor into
the RETURN inputs of the DP-01.
3. Set the Mix control on your effects processor to
100% wet.
4. [DP-01FX only] Turn off the internal reverb processor
by holding the SHIFT button and pressing
the REVERB button (the light will go out).
5. Send your recorded tracks to the effects processor
using the EFFECT SEND knobs above those
channel faders.
6. You can adjust the overall level of the external
effect using the EFFECT RETURN knob.